www.jenoptik-inc.com

Custom optics provided for NASA's LOLA

Sister companies JENOPTIK Optical Systems, Inc. (Jupiter, FL) and MEMS Optical (Huntsville, AL) both supplied optics for NASA’s Lunar Orbiter Laser Altimeter (LOLA).

LOLA_Logo_Final_2

LOLA is one of the payload instruments aboard NASA’s Lunar Reconnaissance Orbiter (LRO) launched June 18, 2009.  LOLA’s primary purpose is to provide a precise global lunar topographic model and geodetic grid to aid future missions in selection of landing and exploration sites.

Aspheres for optical collection path

JENOPTIK Optical Systems fabricated and delivered aspheric telescope optics to Goddard Space Flight Center for LOLA's large collection telescope.

LOLA_EDU_s

*Image from NASA LOLA site

Diffractive optical element (DOE) for optical transmit path

MEMS Optical delivered the diffractive beamsplitter that splits the laser pulse into 5 separate beams.

LOLA_DOE

*Image from NASA LOLA site

LRO is the first mission in NASA's Vision for Space Exploration with objectives of finding safe landing sites, locating potential resources, characterizing the radiation environment, and demonstrating new technology.

LRO is also collecting data for it's sister mission LCROSS.  LCROSS made headlines November 13th, 2009 when NASA announced data from the mission proves that water exists on the moon.  LRO, launched on the same rocket as LCROSS, continues to make passes over the impact site on the moon and collect data.


Links to official NASA site with additional program information

 


For further information contact:
Ray Malcom, V.P., Sales & Marketing
JENOPTIK Optical Systems, Inc.
16490 Innovation Drive
Jupiter, FL 33478
561.881.7400 x-116 | This e-mail address is being protected from spambots. You need JavaScript enabled to view it | www.jenoptik-inc.com
 

Share With


Tour our Facilities

Trade Shows

Home

Webcast on May 26, 2015

Featuring

Jay Kumler, President, JENOPTIK Optical Systems
Dave Stephenson, Vice President, JENOPTIK Optical Systems

http://www.laserfocusworld.com/webcasts/2015/05/lens-design-tools-for-designing-manufacturable-aspheres.html

​Designing aspheres that may be successfully fabricated and tested can be a frustrating experience. The range of possible aspheres is much larger than the range of those that may be fabricated and tested with available tools. There is often little performance penalty involved in keeping aspheres within range, but doing so is difficult.  In this webcast, sponsored by LaCroix Optical, JENOPTIK will describe tools and approaches for designing aspheres that are suitable for MRF polishing and interferometric testing with sub-aperture stitching interferometers.

 

 

op

San Diego Convention Center
San Diego, California, United States

August 9-13, 2015

http://spie.org/x30491.xml

 

CoastalOpt® Gallery

Past Projects

Supporting NPI

You are here: Home News

Contact Us

JENOPTIK Optical Systems, LLC

(561) 881-7400  | Jupiter, FL

(256) 859-1886  | Huntsville, AL

Share